Emulex LightPulse LPe1105-M4 HBA Installation Guide Page 75

  • Download
  • Add to my manuals
  • Print
  • Page
    / 182
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 74
Installation instructions for the Emulex v7.x-Series driver
75
Installing and Configuring the Linux Host with the Emulex Driver
- Installation
- Installing to /lib/modules/2.4.21-15.0.4.ELsmp/kernel/drivers/scsi/lpfc/
/etc/modules.conf: added alias reference for 'lpfc'
/etc/modules.conf: added 'options scsi_mod scsi_allow_ghost_devices=1
max_scsi_luns=255'
depmod....
Saving old initrd as /boot/initrd-2.4.21-15.0.4.ELsmp_old.img
Making new initrd as /boot/initrd-2.4.21-15.0.4.ELsmp.img
(If next boot fails, revert to the _old initrd image)
mkinitrd....
DKMS: install Completed.
* Done : Step 2: The driver has been compiled and installed under /lib/modules
*************************************************************
* The Emulex LPFC Driver has been installed on your system. *
*************************************************************
An example of a newly modified /etc/modules.conf is shown
below.
The last three lines of the file have been newly added by the
installer script.
[root@l82bi250 /]# more /etc/modules.conf
alias eth0 tg3
alias eth1 tg3
alias eth2 tg3
alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptscsih
alias usb-controller usb-ohci
alias scsi_hostadapter2 lpfc
alias scsi_hostadapter3 lpfc
options scsi_mod max_scsi_luns=256 scsi_allow_ghost_devices=1
4. Install the Emulex DFC driver DKMS RPM:
rpm -ivh lpfcdfcdkms-1.0.13-2.noarch.rpm
The output is as follows:
[root@l82bi250 dkms]# rpm -ivh lpfcdfcdkms-1.0.13-2.noarch.rpm
Preparing... ########################################### [100%]
1:lpfcdfcdkms ########################################### [100%]
***************
* Source Files are now available under /usr/src/lpfcdfc-1.0.13
* RPM installer will now attempt to :
* Step 1: Build ioctl module from sources and install under /lib/modules [ make
-C /usr/src/lpfcdfc-1.0.13 build install]
***************
* Action : Step 1: Building ioctl module .
Page view 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 181 182

Comments to this Manuals

No comments