Emulex LightPulse LPe1105-M4 HBA Installation Guide download pdf (Page 52)

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment

Installing and Configuring the Linux Host with the Emulex Driver

Original ramdisk image

/boot/initrd-2.6.9-5.0.3.ELsmp.img saved as

/boot/initrd-2.6.9-5.0.3.ELsmp.img.elx

Creating ramdisk ...

1 message generated during installation:

o The ramdisk for this kernel has been updated.

Please reboot this system to complete the installation

of the Emulex LPFC driver kit.

Note: The system must be rebooted so that the lpfc driver is loaded through

the newly created ramdisk.

Caveat

If the lpfcdfc driver is loaded, then it must be unloaded prior to the

lpfc driver.

Use the following commands to unload the Emulex drivers:

modprobe –r lpfcdfc

modprobe –r lpfc

Included Emulex driver on RHEL 4, RHEL 5, OEL 4, OEL 5, Asianux 2.0, Asianux 3.0,

SLES 9, SLES 10, and SLES 11

Table 5 lists the Emulex driver versions supported with the

corresponding OS updates. These driver versions are included by

default in the kernel and do not require any installation.

Table 5 Supported Emulex driver versions (page 1 of 4)

OS Driver version Supported adapters

1/2 Gb 4 Gb 8 Gb CNA

Red Hat RHEL 4 U1

Asianux 2.0

Miracle Linux SE 4.0

RedFlag DC Server 5.0

Haansoft Linux 2006 Server

8.0.16.6_x2

√

SuSe SLES 9 SP2 8.0.16.6_p3

√√

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 181 182

No comments

Emulex LightPulse LPe1105-M4 HBA Installation Guide Page 52