Emulex LightPulse LPe1105-M4 HBA Installation Guide download pdf (Page 42)

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment

Installing and Configuring the BIOS Settings

3. Copy the file for Open Boot support from the CD-ROM or the

EMC-approved section of the Emulex website to the appropriate

directory,

/usr/sbin/lpfc.

4. Start the boot BIOS update utility:

cd /usr/sbin/lpfc

./lputil

5. Select Option 3 – Firmware Maintenance.

6. Select the adapter number to update.

7. Select Option 1 – Load Firmware Update.

8. Enter the full name of the image file (as shown in the table in item

1; for example,

cd190a4.awc) and press ENTER.

9. Select Option 0 – Return to Main Menu.

10. If desired, repeat steps 4 through 8 for each additional adapter in

the system.

11. Using the lputil, choose the HBA that is to be used for booting

from the fabric. Select Option 3 to enable the boot BIOS on the

intended HBA.

12. Reboot the system.

Note: Booting from the SAN is not supported with EFI boot code.

LP11002-E bb

XXX

.prg (where

XXX

is the version)

Example: bb170a3.prg

LP1005DC Mezzanine for

HPQ Blade Servers

XXX

.prg (where

XXX

is the version)

Example: mp501a5.prg

LP1005DC Mezzanine for

IBM BladeServers

XXX

.prg (where

XXX

is the version)

Example: mc501a3.prg

HBA model Boot BIOS file

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 181 182

Comments to this Manuals

No comments

Emulex LightPulse LPe1105-M4 HBA Installation Guide Page 42

Comments to this Manuals

Related products and manuals for Software Emulex LightPulse LPe1105-M4 HBA