Emulex LightPulse LPe1105-M4 HBA Installation Guide download pdf (Page 61)

Exercising the Emulex v8.x-series device driver

Installing and Configuring the Linux Host with the Emulex Driver

host:/usr/sbin/hbanyware # ./hbacmd allnodeinfo 10:00:00:00:c9:3d:e3:3a

All Node Info for 10:00:00:00:c9:3d:e3:3a

Node Type : READY

FCP ID : 744E13

SCSI Bus Number: 0

SCSI Target Num: 0

Node WWN : 50:06:04:8A:CB:37:C6:63

Port WWN : 50:06:04:8A:CB:37:C6:63

OS Device Name : /sys/class/scsi_host/host0/00,0

host:/usr/sbin/hbanyware # ./hbacmd driverparams 10:00:00:00:c9:3d:e3:3a

Driver Params for 10:00:00:00:c9:3d:e3:3a

DX string Low High Def Cur Exp Dyn

00: log-verbose 0 ffff 0 0 1 1

01: lun-queue-depth 1 80 1e 1e 1 4

02: scan-down 0 1 1 1 1 4

03: nodev-tmo 0 ff 1e 1e 1 1

04: topology 0 6 0 2 1 4

05: link-speed 0 2 0 2 1 4

06: fcp-class 2 3 3 3 1 4

07: use-adisc 0 1 0 0 1 1

08: ack0 0 1 0 0 1 4

09: fcp-bind-method 1 4 2 2 1 4

0a: cr-delay 0 3f 0 0 1 4

0b: cr-count 1 ff 1 1 1 4

0c: fdmi-on 0 2 0 0 1 4

0d: discovery-threads 1 40 1 20 1 4

0e: max-luns 1 8000 100 100 1 4

0f: scsi-req-tmo 0 ff 1e 1e 1 1

host:/usr/sbin/hbanyware # ./hbacmd setdriverparam 10:00:00:00:c9:3d:e3:3a N

nodev-tmo 20

Set Driver Parameter nodev-tmo=20 (N) for 10:00:00:00:c9:3d:e3:3a

host:/usr/sbin/hbanyware # ./hbacmd setdriverparam 10:00:00:00:c9:3d:e3:3a N

log-verbose 20

Set Driver Parameter log-verbose=20 (N) for 10:00:00:00:c9:3d:e3:3a

host:/usr/sbin/hbanyware # ./hbacmd driverparams 10:00:00:00:c9:3d:e3:3a

Driver Params for 10:00:00:00:c9:3d:e3:3a

DX string Low High Def Cur Exp Dyn

00: log-verbose 0 ffff 0 14 1 1

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 181 182

No comments

Emulex LightPulse LPe1105-M4 HBA Installation Guide Page 61