Emulex LightPulse LPe1105-M4 HBA Installation Guide download pdf (Page 36)

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment

Installing and Configuring the BIOS Settings

3. Execute the command /usr/sbin/hbanyware/hbacmd ListHBA,

and record the "Port WWN" information for all adapters within

the host.

4. Execute the command /usr/sbin/hbanyware/hbacmd Download

<WWPN> <firmwarefile>, where WWPN is the first Port WWN

recorded from Step 2, and firmwarefile is the firmware file name

determined in Step 1. The utility will report "Download

Complete." when the firmware download has completed

successfully.

5. If the installed adapter is a dual-ported model, then the boot BIOS

does not need to be downloaded to each adapter port;

downloading it to either port results in both ports being updated

with the latest BIOS. Otherwise, for multiple single-port adapter

models, repeat Step 4 for each adapter port WWN reported in

Step 3, to ensure that all adapter instances within the host have

been updated.

6. Reboot the system.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 181 182

No comments

Emulex LightPulse LPe1105-M4 HBA Installation Guide Page 36