Emulex LightPulse LPe1105-M4 HBA Installation Guide download pdf (Page 100)

100

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment

Updating the Adapter and CEE/Menlo Firmware

Each firmware file contains four files. The naming schema of the

files follows the format as shown in the example below for the

LP9002 v3.92a2 firmware.

cdc392a2.dwc = contains the firmware with combination boot

cdc392a2.awc = contains the firmware with loader and

combination boot

cd392a2.dwc = contains the firmware with no boot code

cd392a2.awc = contains the firmware with loader, no boot

code

2. Execute the command /usr/sbin/hbanyware/hbacmd ListHBA,

and record the Port WWN information for all adapters within the

host.

3. Execute the command /usr/sbin/hbanyware/hbacmd Download

<WWPN> <firmwarefile>, where WWPN is the first Port WWN

recorded from Step 2, and firmwarefile is the firmware file name

determined in Step 1. The utility will report "Download

Complete" when the firmware download has completed

successfully.

4. Repeat Step 3 for each adapter port WWN reported in Step 2, to

ensure that all adapter instances within the host have been

updated.

5. If you do not plan to update the Boot BIOS, then reboot the

system.

LP1005-BC Mezzanine for

IBM Blade Servers

XXX

.all (where

XXX

is the version)

Example: bf210a10.all

LPe1105-M Mezzanine for

Dell Blade Servers

XXX

.all (where

XXX

is the version)

Example: zf280a4.all

LPe1105-M4 Mezzanine for

Dell Blade Servers

XXX

.all (where

XXX i

s the version)

Example: zf280a4.all

LPe1205-M Mezzanine for

Dell Blade Servers

XXX

.all (where

XXX

is the version)

Example: ud110a5.all

Table 8 HBA and CNA Fibre Channel firmware (page 3 of 3)

Adapter model Firmware file

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 181 182

Comments to this Manuals

No comments

Emulex LightPulse LPe1105-M4 HBA Installation Guide Page 100

Comments to this Manuals

Related products and manuals for Software Emulex LightPulse LPe1105-M4 HBA