Emulex 375 User Manual download pdf (Page 59)

EMULEX MODEL 375 SAN STORAGE SWITCH

USER’S GUIDE CHAPTER 3: SWITCH MANAGEMENT

EMULEX CORPORATION 56

ART NUMBER 00041369-002 REV. B

Viewing Port Diagnostics

This page displays diagnostic information pertaining to each port in the switch. Use the information

provided on this page to diagnose abnormally high error counts on a particular port.

To view the current diagnostic settings:

Click Advanced Functions > Diagnostics > Port.

The Port Diagnostics page appears.

Statistic Description

Port & Health Color Indicators

• Green

• Yellow

• Red

See “Port Utilization and Health” on page 52 for descriptions of the health

indicators.

Insertion Count Number of times this port has been inserted into the network since the

switch was reset or the counters were cleared.

CRC Errors Number of CRC errors that are detected in frames passing through this port

since the switch was reset or the counters were cleared.

Ordered Set Errors Number of Ordered Sets that are received on this port with an encoding

error since the switch was reset or the counters were cleared.

Clock Delta Difference (in parts per million) between the internal switch clock and the

received clock signal on the port.

State Current state of this port – either inserted or bypassed

Beacon Port Forces both port LEDs to flash on and off continuously. Use this to locate

and take action on a specific port. The flashing overrides normal port

indication until beaconing is turned off; however, port operation continues to

operate normally.

Figure 3-30: Port Diagnostics page

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 77 78

No comments

Emulex 375 User Manual Page 59