Emulex LPE111-E Datasheet Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1

ANSI Fibre Channel
- FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4,
FC-FLA, FC-PLDA, FC-TAPE, FCP-2
Fibre Channel class 2 and 3
PHP hot plug - hot swap
PCI-X 1.0a and PCI 2.3
PCI Express base spec 1.0a
PCI Express card electromechanical spec 1.0a

Single-channel
Up to 16 total port logins available
2Gb/s or 1Gb/s FC Link speeds
automatically detected
4Gb/s, 2Gb/s or 1Gb/s FC Link speeds
automatically detected

Windows, Linux

x86 and x64 processor families

Data rates
- 1.0625 and 2.125Gb/s auto-detected
- 1.0625, 2.125 and 4.25Gb/s
auto-detected
Optics
- Short wave lasers with LC type connector
Cable
- 50/125µm, up to 300 meters at 2Gb/s;
150 meters at 4Gb/s
- 62.5/125µm, up to 150 meters at 2Gb/s;
70 meters at 4Gb/s

Short, low-prole MD2 form factor card
167.64mm x 64.42mm (6.60" x 2.54")
Standard bracket (low prole available)

LightPulse
®



(Specications apply to both the LP101 and LPe111
unless otherwise noted.)

This document refers to various companies and products by their trade names. In most, if not all cases, their respective companies claim these designations as trademarks or
registered trademarks. This information is provided for reference only. Although this information is believed to be accurate and reliable at the time of publication, Emulex assumes
no responsibility for errors or omissions. Emulex reserves the right to make changes or corrections without notice. This report is the property of Emulex Corporation and may not be
duplicated without permission from the Company.
08-853 · 2/08
3333 Susan Street, Costa Mesa, CA 92626 +1 714 662 5600
 +44 (0) 118 977 2929 | +49 (0) 89 97007 177
 +33 (0) 158 580 022 |  +86 10 68499547

Volts
- +3.3 and +5V
- +3.3
Operating temperature
- 5° to 4C (41° to 11F)
- 0° to 5C (32° to 131°F)
Airow required
- 100 lf/m
- Natural Convection
Storage temperature: -40° to 70°C
(-40° to 15F)
Relative humidity: 5% to 95% non-condensing

Class 1 Laser Product per DHHS 21CFR (J)
and EN60825
UL recognized to UL 60950-1
CUR recognized to CSA22.2, No. 60950-1-03
TUV certied to EN60950

- FCC rules, Part 15, Class A
- ICES–003, Class A
- EMC Directive 2004/108/EEC (CE Mark)
· EN55022, Class A
· EN55024
- Australian EMC Framework (C–Tick Mark)
· AS/NZS CISPR22, Class A
- VCCI, Class A
- MIC (Korea), Class A
- BSMI (Taiwan), Class A

- FCC rules, Part 15, Class B
- ICES-003, Class B
- EMC Directive 2004/108/EEC (CE Mark)
· EN55022, Class B
· EN55024
- Australian EMC Framework (C–Tick Mark)
· AS/NZS CISPR22, Class B
- VCCI, Class B
- MIC (Korea), Class B
- BSMI (Taiwan), Class B

Available from select storage partners

The Emulex feature-rich AutoPilot software
suite speeds and simplies device
management, while reducing administration
costs and protecting your IT investment.
For administrators of smaller Storage Area
Networks (SANs), Emulex AutoPilot Installer
and AutoPilot Manager simplify the installation
and management of HBAs for small and medium
businesses and departmental SANs. Packaged
with the Emulex LightPulse SMB HBAs and
delivered by our OEM partners, Emulex
AutoPilot Installer enables HBA installation
with just a few mouse clicks, while AutoPilot
Manager provides an easy-to-use interface
for HBA management and maintenance. When
combined with right-sized switches and arrays
from our storage partners, the performance
and reliability of SANs can be realized with a
minimum of complexity.
Page view 1
1 2

Comments to this Manuals

No comments